– 64 –
CHAPTER 2 Operations of SV8500 Server
STEP 6 Select US English keymap for the keyboard of the PC.
• Enter “2” or “us” and press the Enter key.
Note: If wrong data or no data is entered, US English keymap is activated.
STEP 7 Login from the login prompt.
Use the login account “root”.
STEP 8 Insert the CF card to be initialized to the PCMCIA card slot of the PC.
STEP 9 Execute the install command.
• Press “y” to the execution confirmation message for installation.
• Press the Enter key.
• Installation starts. (It takes approximately 20 minutes.)
STEP 10 “Installation finish!” is displayed.
• Remove the CF card.
STEP 11 Execute halt command.
Please select a keymap from the following list by typ-
ing in the appropriate name or number. Hit Enter for
the default “us/2” US English keymap.
1 jp
2 us
<< Load keymap (Enter for default)
(none) login: root
root@(none):~#
Login as “root”.
root@(none):~#
root@(none):~# INSTALLCF
......
......
......
do you continue the installation?(y/n): y
Enter “y”, and press the Enter key.
installation finish!
Installation is finished.
root@(none):~#
To Next Page
Loading...
