– 664 –
CHAPTER 5 Operation Procedure for System with PIR
• Cancelling
Figure 5-31 Line Load Control Operations on ATTCON—Cancelling
Figure 5-32 Locations of Lamps (ATTCON)
(2) Key Operations on the Desk Console (DESKCON)
By the operations on the Desk Console, restriction is applied on an outgoing call from a station having SFC
in which the SFI=16 (Line Load Control) of the ASFC command is set as RES=0 (incoming calls to that
station are allowed). For restricting incoming calls from a trunk, system data ASYD, SYS 1, INDEX 59,
b0=1 should be assigned.
Press LOOP key.
Press CANCEL key.
• Lamp (Figure 5-32) on control
panel lights.
• System Message [6-D] displays.
(SST)
Dial the access code for cancelling
Line Load Control.
LAMP
NEC
To Next Page
Loading...
