– 804 –
CHAPTER 7 Maintenance Commands
GKID: Identifier of Gate Keeper (1-255)
GKIP: IP address of Gate Keeper (Display only)
When ViewType = Voice Server:
VS-ID: MAC address of Voice Server
KIND: Kind of Release Note 5
•Soft Reset
• PH Control Data Clear and Soft Reset
• PH Control Data Clear
Note 5: To display this parameter, select an item in the Detail data list, and then click the Execute button. Op-
eration on this parameter is available for the login terminals.
When ViewType = SIP Server:
SIP Server ID: Identifier of SP (1-255)
SIP Server IP: IP Address of SP (Display only)
When ViewType = MPH:
MPH ID: Identifier of MPH (1-4095)
MPH LENS: Line Equipment Numbers (LENS) of MPH (Display only)
Output Data
The following data is displayed in the Detail data list.
When ViewType = Station:
LENS: Line Equipment Number
FPC: Fusion Point Code
Status: Status of the terminal
PH LENS: Line Equipment Number of PH
PH TYPE: Kind of PH
IP: IP address
MAC: MAC address
SEC: Encryption status for signaling data
IP KIND: Kind of IP Equipment
IP CH KIND: Channel Kind of VS-32
To Next Page
Loading...
