– 803 –
CHAPTER 7 Maintenance Commands
When ViewType = PH Control:
PH LENS: Specify the first Group of PH accommodated Location.
PH TYPE: Type of Circuit Card (Display only)
•PHA
•PHD
•PHE
•IPPAD
• Internal PHI
• Internal PHD
• Internal PHE
•MPH
•PHI
REGMAX: Number of ports registered by PH (Display only)
REGCNT: Number of the connected Terminals (Display only)
KIND: Kind of Release Note 4
•Soft Reset
• PH Control Data Clear and Soft Reset
• PH Control Data Clear
Note 4: To display this parameter, select an item in the Detail data list, and then click the Execute button. Op-
eration on tis parameter is available for the login terminals.
When ViewType = IPCS/IPZT:
PCN: PHS Community Number (1-1024)
ERN: Area Number (1-32)
GRN: Group Number (1-8)
CSN: CS Number (1-32)
When ViewType = Gate Keeper:
VS32 (SIP) X VS-32 (SIP)
X: Available to operate on this parameter
NA: Not available to operate on this parameter
-: Not used
To Next Page
Loading...
