– 907 –
CHAPTER 7 Maintenance Commands
The system initialize is executed for STBY side by loading the program and the office data from the CF
card to MEM.
<Standby> Restart
Note 1
The system initialize is executed for STBY side by restarting the system.
<Standby> Shutdown
Note 1
The system initialize is executed for STBY side by shutting the system down.
Note 1: This parameter is only available for North America.
< For Redundant Data Memory Backup on Individual Hard Drive >
Note 2
Click Option in the menu bar, and select Drive Select. A window, with the following parameters, appears.
On the window, designate the affected drive:
Program:
Drive A (default setting)
Drive D
Office Data:
Drive B (default setting)
Drive C
Note 2: This data must be specified only when using the Redundant Data Memory Backup on an Individual
Hard Drive function.
Buttons
Execute: Execute the specified system initialization.
Exit: Exit this command.
To Next Page
Loading...
