328
General S
ecifications
Cha
ter 17
Standard Camera ANM832
Item Specification
Imaging element Interline transfer method. 1/3 inch CCD fixed photo elements
Effective pixels Horizontal 768 x vertical 494 pixels
Scanning method 1/2 interlace
Accumulation method Frame
Shutter speed OFF (1/30), 1/100, 1/250, 1/500, 1/1000, 1/2000
1/4000, 1/10000s (Controller was used for setting a shutter speed.)
Sync method External / Internal
Lens mount CS mount
Rated voltage/Operating
voltage range
12V DC (supplied from the controller) /10.8 to 13.2V DC
Consumed current 140 mA or less
Operating temperature
range
Performance guarantee temperature range: 0°C to +40°C (without icing and dew
condensation)
Storage temperature -30°C to +60°C (without icing and dew condensation)
Operating humidity range 35% RH to 85% RH (without icing and dew condensation at 25°C)
Storage humidity 85 % RH (without icing and dew condensation at 25°C)
Vibration resistance 10 Hz to 55 Hz, 1 sweep per minute, amplitude 1.2 mm, 30 minutes in each X, Y and Z
directions
Jolt resistance 700m/s
2
, 3 times each in X, Y and Z directions
Weight Approx. 300g (without camera cables, lenses and a camera mounting plate)
Length of camera cable Approx. 3m
To Next Page
Loading...
