_____________________________________________________________________________
LB9 User’s Guide 1001/1523
11.2.2.11 Configuring Outbound SSH Client Configuration Page
Selection Criteria
Admin Mode - Specifies if the Outbound Telnet service is Enable or Disable. Default value is
Enable.
Maximum Sessions - Specifies the maximum number of Outbound Telnet Sessions allowed.
Default value is 5. Valid Range is (0 to 5).
Configurable Data
Session Timeout - Specifies the Outbound Telnet login inactivity timeout. Default value is 5. Valid
Range is (1 to 160).
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.