_____________________________________________________________________________
LB9 User’s Guide 157/1523
6.2.10 Port Channel
6.2.10.1 show interface port-channel
This command displays the capability of all port-channels (LAGs) on the device as well as a summary of
individual port-channels.
Default Setting
None
Command Mode
Privileged Exec
Display Message
For each port-channel the following information is displayed:
Channel ID: The field displays the port-channel’s ID.
Port-Channel Name: This field displays the name of the port-channel.
Link State: This field indicates whether the link is up or down.
Trap Flag: This object determines whether or not to send a trap when link status changes. The
factory default is enabled.
Type: This field displays the status designating whether a particular port-channel (LAG) is statically
or dynamically maintained. The possible values of this field are Static, indicating that the
port-channel is statically maintained; and Dynamic, indicating that the port-channel is dynamically
maintained.
Mbr Ports: This field lists the ports that are members of this port-channel, in slot/port notation.
Active Ports: This field lists the ports that are actively participating in this port-channel.
To Next Page
Loading...