_____________________________________________________________________________
LB9 User’s Guide 517/1523
6.16.7 ping
6.16.7.1 ping <ipaddress|host>
This command checks if another computer is on the network and listens for connections. To use this
command, configure the switch for network (in-band) connection. The source and target devices must
have the ping utility enabled and running on top of TCP/IP. The switch can be pinged from any IP
workstation with which the switch is connected through the default VLAN (VLAN 1), as long as there is a
physical path between the switch and the workstation. The terminal interface sends, three pings to the
target station.
ping <ipaddress|hostname> count <0-20000000> [size <32-512>]
ping <ipaddress|hostname> size <32-512> [count <0-20000000>]
< ipaddress|hostname> - a host name or an IP address.
<0-20000000> - number of pings (Range: 0 - 20000000). Note that 0 means infinite.
<size> - packet size (Range: 32 - 512).
Default Setting
Count = 5
Size = 32
Command Mode
Privileged Exec
To Next Page
Loading...
Need help?
General