_____________________________________________________________________________
LB9 User’s Guide 570/1523
6.20.1 General Commands
The following characteristics are configurable for the platform as a whole.
6.20.1.1 diffserv
This command sets the DiffServ operational mode to active. While disabled, the DiffServ configuration is
retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.
Command Mode
Global Config
6.20.1.2 no diffserv
This command sets the DiffServ operational mode to inactive. While disabled, the DiffServ configuration
is retained and can be changed, but it is not activated. When enabled, Diffserv services are activated.
To Next Page
Loading...
Need help?
General