_____________________________________________________________________________
LB9 User’s Guide 1449/1523
11.8.5 Managing DVMRP
11.8.5.1 Configuring DVMRP Global Configuration
Configurable Data
Admin Mode - Select enable or disable from the dropdown menu. This sets the administrative status
of DVMRP to active or inactive. The default is disable.
Non-Configurable Data
Version - The current value of the DVMRP version string. The default value is 3.
Total Number of Routes - The number of routes in the DVMRP routing table.
Reachable Routes - The number of routes in the DVMRP routing table that have a non-infinite
metric.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General