Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 26/1523
2.5.4 Quick Start up IP Address
To view the network parameters the operator can access the device by the following three methods.
ï‚· Simple Network Management Protocol - SNMP
ï‚· Telnet
ï‚· Web Browser
Table 2-4. Quick Start up IP Address
Displays the Network Configurations
Interface Status – Indicates whether the interface is up or
down.
IP Address - IP Address of the interface
Subnet Mask - IP Subnet Mask for the interface.
MAC Address - The MAC Address used for this inband
connectivity
Network Configurations Protocol Current - Indicates which
network protocol is being used. Default is none.
(Config)#interface vlan 1
(if-vlan 1)#ip address <ipaddr> <netmask>
(if-vlan 1)#exit
(Config)#ip default-gateway <gateway>
IP Address range from 0.0.0.0 to 255.255.255.255
Subnet Mask range from 0.0.0.0 to 255.255.255.255
Gateway Address range from 0.0.0.0 to 255.255.255.255
Displays all of the login session information