_____________________________________________________________________________
LB9 User’s Guide 965/1523
10.5.3 show dcbx priority-group interface
This command displays DCBX priority group paramters for an interface.
<slot/port> - interface number
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port: Displays the interface number.
Show Type: Displays the data type, including Admin Config, Oper Config, and Peer Config.
Feature: Displays the feature name.
Enable: Displays the enable mode of PG
Advertise: Displays the advertise mode of PG
Willing: Displays the willing mode of PG
Group Bandwidth: Displays the bandwidth percentage for each group.
Priority Group ID: Displays the Priority and Group ID mapping.
Max Traffic Class: Displays the max. traffic class support.
Oper Version: Displays the operational version of PFC feature.
Max Version: Displays the maximum version of PFC feature.
Error: Displays the error code
Operational Mode: Displays the operational mode of PFC feature.
Syncd with Peer: Displays if feature is synchronized with peer.
(Quanta) #show dcbx priority-group interface 0/1
Port.............................. 0/1
Show Type......................... Admin Config
Feature........................... Priority Group
Enable............................ true
To Next Page
Loading...
Need help?
General