_____________________________________________________________________________
LB9 User’s Guide 818/1523
8.5 IPv4 Protocol Independent Multicast (PIM) Commands
8.5.1 Show Commands
8.5.1.1 show ip pim
This command displays the system-wide information for PIM-DM or PIM-SM.
Default Setting
None
Command Mode
Privileged Exec, User Exec
Display Message
PIM Mode: Indicates whether the PIM mode is dense (PIM-DM) or sparse (PIM-SM)
Data Threshold: Rate (in kbps) of SPT Threshold
Register Rate-limit: Rate (in kbps) of the Register Threshold
Interface: slot/port
Interface Mode: Indicates whether PIM is enabled or disabled on this interface
Operational Status: The current state of PIM on this interface: Operational or Non-Operational.
To Next Page
Loading...
Need help?
General