Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 953/1523
10.4 Congestion Notification
10.4.1 show dcb congestion-notify
This command displays CN function global parameter on system.
Syntax
show dcb congestion-notify
Default Setting
None
Command Mode
Privileged Exec
Display Message
Congestion Notify: Displays Congestion Notification function status.
Tag ethertype recognize: When set to 1 , CN-Tag ether type is recognized by parsing stages
Tag ethertype: A new tag that is being added by 802.1Qau as a part of the congestion management
requirements.
Msg ethertype: A message generated by the CP which informs the reaction point(RP) about the
level of congestion at the CP.
CPID devid: Congestion point ID, A 64 bit value associated with every CP in the network. It is sent
back along with every CNM so that network adminiatrators can use the CNMs to debug their
network.
CPID LSB:. Displays Control the LSB field of Congestion Point Identifier of CNM payload.
outer TPID:. Displays Outer TPID for Congestion Notification Message (CNM).
outer VLAN: Displays Outer VLAN ID for Congestion Notification Message (CNM).
outer Dot1p: Displays Outer Packet Priority for Congestion Notification Message
outer CFI: Displays Outer Packet CFI for Congestion Notification Message
inner CFI: Displays Inner Packet CFI for Congestion Notification Message
inner Dot1p: Displays Inner Packet Priority for Congestion Notification Message
no-generate: Generate CNM or not.

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English