_____________________________________________________________________________
LB9 User’s Guide 1066/1523
11.2.10 Managing CDP Function
11.2.10.1 Defining CDP Configuration Page
Use this menu to configure the parameters for CDP, which is used to discover a CISCO device on the
LAN.
Selection Criteria
Admin Mode - CDP administration mode which are Enable and Disable.
Interface - Specifies the list of ports.
Configurable Data
Hold Time - the legal time period of a received CDP packet.
Transmit Interval - the CDP packet sending interval.
Command Buttons
Submit - Send the updated screen to the switch. Changes take effect on the switch but these
changes will not be retained across a power cycle unless a save is performed.
To Next Page
Loading...
Need help?
General