_____________________________________________________________________________
LB9 User’s Guide 51/1523
6.1.7 show system
This command displays switch system information.
Default Setting
None
Command Mode
Privileged Exec
Display Message
System Description: Text used to identify this switch.
System Object ID: The manufacturing ID
System Information
System Up Time: The time in days, hours and minutes since the last switch reboot.
System Name: Name used to identify the switch.
System Location: Text used to identify the location of the switch. May be up to 255
alpha-numeric characters. The factory default is blank.
System Contact: Text used to identify a contact person for this switch. May be up to 255
alphanumeric characters. The factory default is blank.
MAC Address: The burned in MAC address used for in-band connectivity.
Web Server: Displays to enable/disable web server function
Web Server Port: Displays the web server http port
Web Server Java Mode: Specifies if the switch should allow access to the Java applet in the
header frame. Enabled means the applet can be viewed. The factory default is disabled.
Protocol Current: Indicates which network protocol is being used. The options are bootp | dhcp |
none.
DHCP Client Identifier TEXT: DCHP client identifier for this switch.
To Next Page
Loading...
Need help?
General