_____________________________________________________________________________
LB9 User’s Guide 1516/1523
11.10.6 Managing EVB
11.10.6.1 EVB Configuration
Selection Criteria
Interface - You can use this to set up EVB parameter for an interface.
Admin Mode - Set administrative mode for EVB of an interface(s)
Configurable Data
RTE - Get or Set Retransmission Exponent for a interface(s), Range From 16-31.
Command Buttons
Submit - Update the switch with the values on this screen. If you want the switch to retain the new
values across a power cycle, you must perform a save.
To Next Page
Loading...
Need help?
General