Quanta Computer T5016-LB8D - Dhcpv6 Client Commands

To Next Page

To Previous Page

UANTA COMPUTER INC.

Layer 2/3/4 Managed Switch

_____________________________________________________________________________

LB9 User’s Guide 247/1523

6.3.12 DHCPv6 Client Commands

6.3.12.1 ipv6 address dhcp

This command specifies the network of IPv6 configuration protocol to be used . If you modify this value,

the change is effective immediately.

Syntax

ipv6 address dhcp [restart]

<dhcp> - Obtains IPv6 address from DHCPv6.

<restart> - To restart the DHCPv6 process.

Default Setting

None

Command Mode

Interface-Vlan Config

Interface Config