_____________________________________________________________________________
LB9 User’s Guide 1115/1523
11.3.3 Managing DHCP Snooping
11.3.3.1 Configuring DHCP Snooping Configuration Page
Configurable Data
DHCP Snooping Mode - Enables or disables the DHCP Snooping feature. The factory default is
disabled.
MAC Address Validation - Enables or disables the validation of sender MAC Address for DHCP
Snooping. The factory default is enabled.
Command Buttons
Submit - Applies the new configuration and causes the changes to take effect. These changes will
not be retained across a power cycle unless a save configuration is performed.
To Next Page
Loading...