Quanta Computer T5016-LB8D - Configuration Commands

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 717/1523
7.3.2 Configuration Commands
7.3.2.1 router ospf
Use this command to enter Router OSPF mode.
Syntax
router ospf
Default Setting
None
Command Mode
Global Config
7.3.2.2 enable
Use enable command resets the default administrative mode of OSPF in the router (active). no enable
command sets the administrative mode of OSPF in the router to inactive
Syntax
enable
no enable
Default Setting
Enabled
Command Mode
Router OSPF Config Mode