EasyManua.ls Logo

Quanta Computer T5016-LB8D - Priority-Based Flow Control; Show Dcb Priority-Flow-Control; Priority-Flow-Control Mode

Default Icon
1523 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 947/1523
10.2 Priority-based Flow Control
10.2.1 show dcb priority-flow-control
Display the PFC information of a given interface or all interface.
Syntax
show dcb priority-flow-control {<interface> | all }
Default Setting
None
Command Mode
Privileged Exec
10.2.2 priority-flow-control mode
Set Priority-Flow-Control (PFC) to be enabled, disabled, or atuo on the interface.
i
Both PFC and 802.3x flow control are enabled, PFC will take effect.
Syntax
priority-flow-control mode { on | auto}
no priority-flow-control mode
no - This command auto the Priority-Flow-Control (PFC) on the interface.
Default Setting
Auto
Command Mode
DCB (Data Center Bridging) interface mode

Table of Contents