EasyManua.ls Logo

Quanta Computer T5016-LB8D - Congestion-Notify Tag

Default Icon
1523 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 956/1523
10.4.4 congestion-notify tag
The user can go to the CLI Global Configuration Mode to configure the CNTAG Ether Type is recognized
by parsing stages. Use the ‘congestion-notify tag ethertype recognize’ global configuration command.
Use the ‘no congestion-notify tag ethertype recognize’ to configure CNTAG Ether Type is unrecognized.
Syntax
congestion-notify tag ethertype recognize
no congestion-notify tag ethertype recognize
no - This command disables CN tag processing.
Default Setting
Enabled
Command Mode
Global Data-Center-Bridging Mode
The user can go to the CLI Global Configuration Mode to configure the Ether Type of CN-TAG. Use the
‘congestion-notify tag ethertype <value>’ global configuration command. Use the ‘no congestion-notify
tag ethertype’ to configure CN-TAG Ether Type to default value..
Syntax
congestion-notify tag ethertype <0-65535>
Default Setting
0x22e9
Command Mode
Global Data-Center-Bridging Mode

Table of Contents