_____________________________________________________________________________
LB9 User’s Guide 238/1523
6.3.8 HTTP commands
6.3.8.1 show ip http
This command displays the http settings for the switch.
Default Setting
None
Command Mode
Privileged Exec
Display Message
HTTP Mode (Unsecure): This field indicates whether the HTTP mode is enabled or disabled.
HTTP Port: This field specifies the port configured for HTTP.
HTTP Mode (Secure): This field indicates whether the administrative mode of secure HTTP is
enabled or disabled.
Secure Port: This field specifies the port configured for SSLT.
Secure Protocol Level(s): The protocol level may have the values of SSL3, TSL1, or both SSL3
and TSL1.
Hard-timeout: Display the hard timeout for secure HTTP sessions in hours.
Soft-timeout: Display the soft timeout for HTTP sessions in minutes.
Max-sessions: Display the number of allowable HTTP sessions.
Secure-hard-timeout: Display the hard timeout for secure HTTP sessions in hours.
Secure-soft-timeout: Display the soft timeout for HTTP sessions in minutes.
Secure-max-sessions: Display the number of allowable HTTP sessions.
To Next Page
Loading...
Need help?
General