Quanta Computer T5016-LB8D - Page 237

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 237/1523
6.3.7.5 snmpinform mode
This command activates or deactivates an SNMP inform. Enabled inform receivers are active (able to
receive informs). Disabled inform receivers are inactive (not able to receive informs).
Syntax
snmpinform mode <name> <ipAddr|ipv6Addr|hostname>
no snmpinform mode <name> <ipAddr|ipv6Addr|hostname>
<name> - SNMPv2 community name or SNMPv3 user name.
<ipAddr|ipv6Addr|hostname> - an original IPv4 or IPv6 address or hostname.
no - This command deactivates an SNMP inform. Inform receivers are inactive (not able to receive
traps).
Default Setting
None
Command Mode
Global Config