_____________________________________________________________________________
LB9 User’s Guide 680/1523
7.2 IP Routing Commands
7.2.1 Show Commands
7.2.1.1 show ip brief
This command displays all the summary information of the IP.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Default Time to Live: The computed TTL (Time to Live) of forwarding a packet from the local router
to the final destination.
Routing Mode: Show whether the routing mode is enabled or disabled.
Maximum Next Hops: The maximum number of hops supported by this switch.
Maximum Routes: The maximum number of routes the packet can travel.
ICMP Rate Limit Interval: Shows how often the token bucket is initialized with burst-size tokens.
Burst-interval is from 0 to 2147483647 milliseconds. The default burst-interval is 1000 msec.
ICMP Rate Limit Burst Size: Shows the number of ICMPv4 error messages that can be sent during
one burst-interval. The range is from 1 to 200 messages. The default value is 100 messages.
ICMP Echo Replies: Shows whether ICMP Echo Replies are enabled or disabled.
ICMP Redirects: Shows whether ICMP Redirects are enabled or disabled.
To Next Page
Loading...
Need help?
General