Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 967/1523
10.5.4 dcbx enable
This command sets DCBX administrative mode for an interface. Use no form of this command to disable
the DCBX for an interface.
dcbx enable
no dcbx enable
no - This command sets administrative mode to disable for the interface.
Default Setting
Disabled
Command Mode
Data Center Bridging Interface Mode
10.5.5 dcbx priority-flow-control willing
This command sets DCBX willing mode for priority-flow-control. Use no form of this command to disable
it.
dcbx priority-flow-control willing
no dcbx priority-flow-control willing
no - This command sets willing mode to disable for the interface.
Default Setting
Enabled
Command Mode
Data Center Bridging Interface Mode