_____________________________________________________________________________
LB9 User’s Guide 970/1523
10.6.2 show evb status
This command displays EVB function interface parameter on system.
Default Setting
None
Command Mode
Privileged Exec
Display Message
Admin Mode: Display the administrative mode of this interface
Remote Sync: Displays the synchronization status
Support Capability: Displays the support capabilities of EVB on this interface.
Configure Capability: Displays the configured capabilities of EVB on this interface.
Support Mode: Display the support mode of EVB on this interface.
Configure Mode: Display the configured mode of EVB on this interface.
Configure RTE: Display the configured RTE of EVB on this interface.
Current RTE: Display the current RTE of EVB on this interface.