Quanta Computer T5016-LB8D - Configuration Commands

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 934/1523
9.5.2 Configuration Commands
9.5.2.1 enable
This command resets the default administrative mode of RIPng in the router (active).
Syntax
enable
no enable
no - This command sets the administrative mode of RIPng in the router to inactive.
Default Setting
Enabled
Command Mode
IPv6 Router RIP Config
9.5.2.2 ipv6 rip
This command enables RIPng on a router interface.
Syntax
ipv6 rip
no ipv6 rip
no - This command disables RIPng on a router interface.
Default Setting
Disabled
Command Mode
Interface Config