Quanta Computer T5016-LB8D - Configuration Commands

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 669/1523
6.28.2 Configuration Commands
6.28.2.1 mlag
This command enables a Multi-chassis Link Aggregation (MLAG), which allows links that are physically
connected to two different devices to appear as a single port channel to a third device.
To disable MLAG on the switch, use the no form of this command.
Syntax
mlag
no mlag
Default Setting
Disabled
Command Mode
Global Config
6.28.2.2 mlag domain
This command creates a Multi-chassis Link Aggregation (MLAG) domain and assign a domain ID. The
range is from 1 and 1000.
To revert to the default mlag configuration, use the no form of this command
Syntax
mlag domain <domain-id>
no mlag domain
<domain-id> - Domain identify number of MLAG (Range: 1 – 1000).
Default Setting
1
Command Mode
Global Config