_____________________________________________________________________________
LB9 User’s Guide 990/1523
11.2.2 Configuring Management Session and Network Parameters
11.2.2.1 Viewing System Description Page
Configurable Data
System Name - Enter the name you want to use to identify this switch. You may use up to 255
alpha-numeric characters. The factory default is blank.
System Location - Enter the location of this switch. You may use up to 255 alpha-numeric
characters. The factory default is blank.
System Contact - Enter the contact person for this switch. You may use up to 255 alpha-numeric
characters. The factory default is blank.
Non-Configurable Data
Service Port IP Address - The IP Address assigned to the Service Port.
System Object ID - The base object ID for the switch's enterprise MIB.
System Up time - The time in days, hours and minutes since the last switch reboot.
Current SNTP Synchronized Time - Displays currently synchronized SNTP time in UTC. If time is
not synchronized, it displays "Not Synchronized."
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
To Next Page
Loading...