_____________________________________________________________________________
LB9 User’s Guide 991/1523
11.2.2.2 IP Address Conflict Detection
Non- Configurable Data
Conflict Detection Status - Whether or not an address conflict has been detected since status was last
reset.
Last Conflicting IP Address - The IP address of the interface that was last found to be conflicting.
Last Conflicting MAC Address - The MAC address of the remote host associated with the IP
address that was last found to be conflicting.
Time Since Conflict Detected - The time elapsed (displayed in days, hours, mins, secs) since the
last conflict was detected (provided a reset did not occur in the meantime).
Command Buttons
Reset Conflict Detection Status - Reset the last conflict detection status on the switch.
Run Conflict Detection - Triggers the active IP address conflict detection in the system.
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...