Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 236/1523
6.3.7.4 snmpinform ipaddr <name> <ipAddr|ipv6Addr|hostname> <new
ipAddr|ipv6Addr|hostname>
This command changes the IP address of the inform receiver for the specified community name. The
maximum length of name is 16 case-sensitive alphanumeric characters.
i
IP addresses in the SNMP inform receiver table must be unique for the same community
name or user name. If you make multiple entries using the same IP address and community
name or user name, the first entry is retained and processed. All duplicate entries are
ignored.
Syntax
snmpinform ipaddr <name> <ipAddr|ipv6Addr|hostname> <new ipAddr|ipv6Addr|hostname>
<name> - SNMPv2 community name or SNMPv3 user name.
<ipAddr|ipv6Addr|hostname> - an original IPv4 or IPv6 address or hostname.
<new ipAddr|ipv6Addr|hostname> - a new IPv4 or IPv6 address or hostname.
Default Setting
None
Command Mode
Global Config

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English