Quanta Computer T5016-LB8D User Manual

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 235/1523
6.3.7.2 snmpinform version
This command configures the version for snmp inform.
Syntax
snmpinform version <name> <ipAddr|ipv6Addr|hostname> <version>
<name> - SNMP trap name (Range: up to 16 case-sensitive alphanumeric characters).
<ipAddr|ipv6Addr|hostname> - an IPv4 or IPv6 address or hostname of the inform receiver.
<version> - SNMP inform version, SNMPv2 or SNMPv3.
Default Setting
SNMPv2
Command Mode
Global Config
6.3.7.3 snmpinform <name> <ipAddr|ipv6Addr|hostname> version <snmpversion>
This command adds an SNMP inform name. The maximum length of the name is 16 case-sensitive
alphanumeric characters.
Syntax
snmpinform <name> <ipAddr|ipv6Addr|hostname> version <version>
no snmpinform <name> <ipAddr|ipv6Addr|hostname>
<name> - SNMP trap name (Range: up to 16 case-sensitive alphanumeric characters).
<ipAddr|ipv6Addr|hostname> - an IP or IPv6 address or hostname of the inform receiver.
<version> - SNMP inform version, SNMPv2 or SNMPv3.
no - This command deletes trap receivers for a community.
Default Setting
None
Command Mode
Global Config

Quanta Computer T5016-LB8D Specifications

General

Brand	Quanta Computer
Model	T5016-LB8D
Category	Switch
Language	English