_____________________________________________________________________________
LB9 User’s Guide 817/1523
8.4.2.3 ip multicast ttl-threshold
This command applies the given <ttlthreshold> to a routing interface. The <ttlthreshold> is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the
interface. The value for <ttlthreshold> has range from 0 to 255.
<0 - 255> - the TTL threshold.
no - This command applies the default <ttlthreshold> to a routing interface. The <ttlthreshold> is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface.
Default Setting
1
Command Mode
Interface Config