_____________________________________________________________________________
LB9 User’s Guide 1006/1523
Host Name/IPv6 Address - Enter the IPv6 address or Hostname of the station you want the switch
to ping. The initial value is blank. The IPv6 Address or Hostname you enter is not retained across a
power cycle.
Link Local Address - Enter the link local address of the station you want the switch to ping. The
initial value is blank. The Link Local Address you enter is not retained across a power cycle.
Datagram Size - Enter the datagram size. The valid range is 48 to 2048.
Non-Configurable Data
Ping – The reply result received from switch.
Command Buttons
Submit - This will initiate the Ping.
To Next Page
Loading...
Need help?
General