_____________________________________________________________________________
LB9 User’s Guide 1020/1523
11.2.5.4 Viewing Authentication List Summary Page
Non-Configurable Data
Login Authentication List - Shows the Login authentication profiles.
Enable Authentication List - Shows the Enable authentication profiles.
Login/Enable Method List - User authentication methods. Possible options are:
(1) Enable - uses the enable password for authentication.
(2) Line - uses the Line password for authentication.
(3) Local - the user's locally stored ID and password will be used for authentication
(4) None - the user is not authenticated
(5) Radius - the user's ID and password will be authenticated using the RADIUS server instead
of locally
(6) TACACS+ - the user's ID and password will be authenticated using the TACACS+ server
(7) LDAP - the user's ID and password will be authenticated using the LDAP server
The Authentication Lists and Authentication Methods configured for each List of Console, Telnet,
SSH, HTTPS, HTTP and DOT1X are displayed respectively.
Command Buttons
Refresh - Update the information on the page. Summit- Sends the updated screen to the switch and
causes the changes to take effect on the switch. These changes will not be retained across a power
cycle unless you perform a save.
To Next Page
Loading...
Need help?
General