_____________________________________________________________________________
LB9 User’s Guide 1023/1523
11.2.5.6 Configuring Line Password
Configuration Data
Line Mode - Select the line mode from the drop-down list.
Line Password (8-64 characters) - The line password for accessing the device via a console,
Telnet, or Secure Telnet session.
Confirm Password (8-64 characters) - Confirms the new line password. The password appears in
the ..... format or ***** based on the browser used.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
11.2.5.7 Configuring Enable Password
Configuration Data
Enable Password (8-64 characters) - The enable password is for accessing the device via a
console, Telnet, or Secure Telnet session.
Confirm Enable Password (8-64 characters) - Confirms the new enable password. The password
appears in the ..... format or ***** based on the browser used.
Command Buttons
Submit - Update the switch with the values on the screen. If you want the switch to retain the new
values across a power cycle you must perform a save.
To Next Page
Loading...
Need help?
General