_____________________________________________________________________________
LB9 User’s Guide 1061/1523
 Version Not Supported – The SNTP version supported by the server is not compatible with
the version supported by the client.
ï‚· Server Unsynchronized - The SNTP server is not synchronized with its peers. This is
indicated via the 'leap indicator' field on the SNTP message.
ï‚· Server Kiss Of Death - The SNTP server indicated that no further queries were to be sent to
this server. This is indicated by a stratum field equal to 0 in a message received from a
server.
Server IP Address - Specifies the IP address of the server for the last received valid packet. If no
message has been received from any server, an empty string is shown.
Address Type - Specifies the address type of the SNTP Server address for the last received valid
packet.
Server Stratum - Specifies the claimed stratum of the server for the last received valid packet.
Reference Clock Id - Specifies the reference clock identifier of the server for the last received valid
packet.
Server Mode - Specifies the mode of the server for the last received valid packet.
Unicast Sever Max Entries - Specifies the maximum number of unicast server entries that can be
configured on this client.
Unicast Server Current Entries - Specifies the number of current valid unicast server entries
configured for this client.
Broadcast Count - Specifies the number of unsolicited broadcast SNTP messages that have been
received and processed by the SNTP client since last reboot.
Multicast Count - Specifies the number of unsolicited muticast SNTP messages that have been
received and processed by the SNTP client since last reboot.
To Next Page
Loading...
Need help?
General