Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 107/1523
be associated with one group. If adding a protocol to a group causes any conflicts with interfaces
currently associated with the group, this command will fail, and the protocol will not be added to the
group. The possible values for protocol are ip, arp, and ipx.
switchport protocol group add protocol <group-name> {ip | arp | ipx}
no switchport protocol group add protocol <group-name> {ip | arp | ipx}
<group-name> - a VLAN Group Name (a character string of 1 to 16 characters).
ip - IP protocol.
arp - ARP protocol.
ipx - IPX protocol.
no - This command removes the <protocol> from this protocol-based VLAN group that is identified
by this <group-name>. The possible values for protocol are ip, arp, and ipx.
Default Setting
None
Command Mode
Global Config
To Next Page
Loading...