_____________________________________________________________________________
LB9 User’s Guide 1098/1523
11.2.16.3 Time Range Entry Configuration
Selection Criteria
Time Range Name - Select the time range for which to create or delete a time entry.
Time Range Entry - Select an existing time range entry or select 'Create New Time Range Entry' to
add a new time range entry. New time range entries cannot be created if the maximum number of
entries has been reached. A time range entry can either be an absolute entry or periodic entry. Only
one absolute entry can be configured per time range.
Configurable Data
Time Range Entry ID - Enter a whole number in the range of (1 to 10) that will be used to identify the
time range entry.
Time Range Entry Type - Specify what type of entry should be created. The choices are Absolute
or Periodic.
Start Date - Select the day of the month of the absolute entry's start date.
Start Month - Select the month of the absolute entry's start date.
Start Year - Select the year of the absolute entry's start date.
Start Time - Specify the absolute start time in hh:mm format.
End Date - Select the day of the month of the absolute entry's end date.
End Month - Select the month of the absolute entry's end date.
End Year - Select the year of the absolute entry's end date.
End Time - Specify the absolute end time in hh:mm format.
Absolute Start Date and Time - Specifies the absolute entries start date and time.
Absolute End Date and Time - Specifies the absolute entries end date and time.
Applicable Days - Specify the applicable day(s) of week for periodic entry.
- Option 'Daily' indicates that periodic entry is applicable on every day of week.
- Option 'Weekdays' indicates that periodic entry is applicable only on weekdays.
To Next Page
Loading...
Need help?
General