_____________________________________________________________________________
LB9 User’s Guide 1104/1523
11.2.17.5 Configuring Hosts Configuration Page
You can use this screen to change the configuration parameters for the static entry in the DNS table.
You can also use this screen to display the contents of the table.
Selection Criteria
Protocol - Select IPv4 or IPv6 to configure the corresponding attributes.
Domain - Specifies all the existing hosts along with an additional option "Create". When the user
selects "Create" another text box "Domain Name" appears where the user may enter host to be
configured.
Configurable Data
Domain Name - Specifies the domain name of the host. This is a text string of up to 253 characters.
IP Address - Specifies the address of the host.
Command Buttons
Submit - Sends the updated configuration to the switch. Configuration changes take effect
immediately.
Delete - Deletes the host entry. Sends the updated configuration to the switch. Configuration
changes take effect immediately.
Delete All - Deletes all the host entries. Sends the updated configuration to the switch. Configuration
changes take effect immediately.
To Next Page
Loading...
Need help?
General