_____________________________________________________________________________
LB9 User’s Guide 1268/1523
Submit - Sends the updated screen to the switch and causes the changes to take effect on the
switch but these changes will not be retained across a power cycle unless a save is performed.
Remove - Remove the selected accounting server from the configuration. This button is only
available to READWRITE users. These changes will not be retained across a power cycle unless a
save is performed.
Refresh - Update the information on the page.
11.4.4.6 RADIUS Named Accounting Server Status
The RADIUS Named Accounting Server Status page shows summary information about the accounting
servers configured on the system.
Non-Configurable Data
RADIUS Accounting Server Name - Shows the RADIUS accounting server name.Multiple RADIUS
accounting servers can have the same name. In this case, RADIUS clients can use RADIUS servers
with the same name as backups for each other.
IP Address - Shows the IP address of the RADIUS server.
Port Number - Identifies the authentication port the server uses to verify the RADIUS server
authentication. The port is a UDP port.
Secret Configured - Indicates whether the shared secret for this server has been configured.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General