_____________________________________________________________________________
LB9 User’s Guide 1324/1523
11.5.4.4 Viewing iSCSI Sessions Detailed Page
Use the iSCSI Sessions Detailed page to view detailed information on iSCSI sessions.
Non-Configurable Data
Target Name - Shows the name assigned to the target.
Initiator Name - Shows the name of the initiator.
Up Time - Show the time that has elapsed since the session was created.
Time for aging out (in Seconds) - Show the time (in seconds) left before the session is set to
expire.
ISID (Initiator Session ID) - Shows the unique indentifier an initiator assigns to the session
endpoint. When it is combined with the iSCSI initiator name, it provides a unique name in the world
for the SCSI initiator port.
Initiator IP Address - Shows the Initiator IP Address.
Initiator TCP Port - Shows the Initiator TCP Port number of one of the connections between the
Target and initiator.
Target IP Address - Shows the IP Address of the Target.
Target TCP Port - Shows the Target TCP Port number of one of the connections between the
Target and Initiator.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the switch.
To Next Page
Loading...
Need help?
General