_____________________________________________________________________________
LB9 User’s Guide 141/1523
6.2.8.3 show ipv6 mld snooping mrouter vlan
The user can go to the CLI Privilege Exec to display information about statically configured multicast
router-attached interfaces, use the show ipv6 mld snooping mrouter vlan Privilege command.
<slot/port> - Interface number.
<portchannel-id> - Port-channel interface number. The range of port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VLAN ID: Displays the list of VLANs of which the interface is a member.
Slot/Port: Shows the interface on which multicast router information is being displayed.
To Next Page
Loading...
Need help?
General