Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 155/1523
6.2.9.8 ipv6 mld snooping querier vlan
The user can go to the CLI Global Configuration Mode to set MLD snooping querier vlan admin mode,
use the ipv6 mld snooping querier vlan <vlan-id> global configuration command. Use the no ipv6
mld snooping querier vlan <vlan-id> return to disable.
ipv6 mld snooping querier vlan <vlan-id>
no ipv6 mld snooping querier vlan <vlan-id>
<vlan-id> - VLAN ID (Range: 1 – 4093).
Default Setting
Disabled
Command Mode
Global Config
6.2.9.9 ipv6 mld snooping querier vlan address
The user can go to the CLI Global Configuration Mode to set MLD snooping querier vlan address, use
the ipv6 mld snooping querier vlan <vlan-id> address <ip-address> global configuration command.
Use the no ipv6 mld snooping querier vlan <vlan-id> address <ip-address> return to default value
zero.
ipv6 mld snooping querier vlan <vlan-id> address <ipv6-address>
no ipv6 mld snooping querier vlan <vlan-id> address <ipv6-address>
<vlan-id> - VLAN ID (Range: 1 – 4093).
<ipv6-address> - The IPv6 address will be used in the IPv6 header while sending out MLD queries
on this VLAN.
Default Setting
Disabled
Command Mode
Global Config