Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 161/1523
6.2.10.3 port-channel adminmode all
This command sets every configured port-channel with the same administrative mode setting.
port-channel adminmode all
no port-channel adminmode all
no - This command disables a port-channel (LAG). The option all sets every configured port-channel
with the same administrative mode setting.
Default Setting
Enabled
Command Mode
Global Config
6.2.10.4 staticcapability
This command enables the static function to support on specific port-channel (static link aggregations -
LAGs) on the device. By default, the static capability for all of port-channels is disabled.
staticcapability
no staticcapability
no - This command disables to support static function on specific port-channel on this device.
Default Setting
Disabled
Command Mode
Interface Config