Quanta Computer T5016-LB8D - Page 169

UANTA COMPUTER INC.
Layer 2/3/4 Managed Switch
_____________________________________________________________________________
LB9 User’s Guide 169/1523
This command set collector max-delay time of Link Aggregation Control Protocol (LACP) on a
port-channel.
Syntax
lacp collector max-delay <delay-value>
no lacp collector max-delay
<delay-value>: 0-65535
no - This command restores collector max-delay time of Link Aggregation Control Protocol (LACP)
on a port-channel
Default Setting
0
Command Mode
Interface Config
6.2.10.11 channel-group
This command adds one port to the port-channel (LAG). The first interface is a logical slot and port
number of a configured port-channel.
i
Before adding a port to a port-channel, set the physical mode of the port. See ‘speed’
command.
Syntax
channel-group <ID>
<ID> - Port-Channel Interface number. The range of the port-channel ID is 1 to 64.
Default Setting
None
Command Mode
Interface Config
Command Usage
The maximum number of members for each port-channel is 8.