_____________________________________________________________________________
LB9 User’s Guide 200/1523
Allow New Telnet Sessions: Indicates that new telnet sessions will not be allowed when set to no.
The factory default value is yes.
Telnet Server Admin Mode: The telnet server admin mode status. The factory default is enable.
Password Threshold: When the logon attempt threshold is reached on the console port, the system
interface becomes silent for a specified amount of time before allowing the next logon attempt. (Use
the silent time command to set this interval.) When this threshold is reached for Telnet, the Telnet
logon interface closes.
Terminal Length: The columns per page for terminal vty port.
6.3.3.3 line vty
This command is used to enter vty (Telnet) configuration mode.
To Next Page
Loading...
Need help?
General