_____________________________________________________________________________
LB9 User’s Guide 206/1523
6.3.3.13 show telnet
This command displays the current outbound telnet settings.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
Outbound Telnet Login Timeout (in minutes) Indicates the number of minutes an outbound telnet
session is allowed to remain inactive before being logged off. A value of 0, which is the default,
results in no timeout.
Maximum Number of Outbound Telnet Sessions Indicates the number of simultaneous outbound
telnet connections allowed.
Allow New Outbound Telnet Sessions Indicates whether outbound telnet sessions will be allowed.
To Next Page
Loading...